Wet Paints

5 + 1 POLYAMIDE PRIMER

This primer is formulated to provide optimum corrosion resistance, adhesion and filling properties in systems using either Two Pack POLYAMIDE CURED Finish or Two Pack CURED Finish. This versatile primer is also suitable for use in conjunction with a wide range of air drying and stoving finishes. The product is also designed as a robust finishing primer if and when colour is not paramount. This primer may be sprayed or brushed and can be force dried according to the system specification.

Coverage : Calculated on dry film thickness of 37.5 microns : Conventional spray 5-6m² pr ltr of mixed material

Packaging : 2.5 & 5 litre composite packs

ACRAPOXY - 2PK EPOXY PRIMER

A general purpose high performance, high build 2 pack epoxy priming paint system. It gives excellent mechanical properties such as hardness, toughness & chemical resistance combined with good resistance to a wide range of chemicals, including dilute acids / alcohol's and mild solvents. It is used for general finishing for interior work on ferrous and non-ferrous metals, wood, concrete, fibreglass, asbestos and various plastics. Clear is used extensively as a high performance clear coat for contract furniture and flooring applications. Combines a good wet edge time with rapid thorough drying and consistency, curing is good, even at very low ambient temperatures.

Compared with Q19 2 pack epoxy finishes, this coating possesses superior gloss retention and weather resistance and would be preferred for applications in which outdoor durability is more important than chemical resistance. Also is faster curing due to being solvent based. Where it is essential to have the maximum durability and gloss retention possible, combined with chemical resistance and anti-yellowing properties.

Coverage : Approximately 5 m² per litre at 50 microns

Packaging : Available in component form 3 and 6 litre packs

HIGH BUILD ZINC PHOSPHATE PRIMER - SINGLE PACK

An alkyd resin based air dry primer. The product adheres well and provides protection to correctly prepared steel surfaces [before over-coating takes place). Standard Zinc Phosphate is commonly used when thinned as a very fast drying, economical holding primer. HIGH BUILD ZINC PHOSPHATE is suitable for application by spray, brush or roller (depending upon area size) This is a hard-wearing primer which is economical as the paint is still useable once the pot has been opened. It also can be used as a weld through primer if thinly applied.

Coverage : On a dry film thickness of 45 microns, conventional spraying will cover 5-8m² per litre, 55 microns will cover 4-6m² per litre. Coverage will vary according to individual conditions.

Packaging : 1, 2.5, 5 & 20 (Grey and Red Oxide only) Litre tins.

Colours : Red Oxide, Grey. White, Black & Buff

MICACEOUS IRON OXIDE

An alkyd resin based air dry or force dried primer. The product adheres well and provides protection to correctly prepared heavy steel and iron surfaces [before over-coating takes place]. This is a very high build primer that must be overcoated. MICACEOUS IRON OXIDE is suitable for application by spray, brush or roller [depending upon area size]. This is a hard wearing primer which is economical as the paint is still useable once the pot has been opened.

Coverage : On a dry film thickness of 45 microns, conventional spraying will cover 5-8m² per litre. 65 microns - 4-6m² per litre.

Packaging : 1, 2.5 & 5 Litres Colours : Red, Grey or Dark Grey

BLAST PRIMER

A phenolic polyvinyl butyral resin based air dry primer designed to be applied directly onto blasted steel and iron surfaces. The product adheres well and provides protection to correctly prepared steel surfaces (before over-coating takes place). BLAST PRIMER is suitable for application by airless or conventional spray (depending upon area size). This is a hard wearing primer which is economical, as the paint is still useable once the pot has been opened.

Coverage : On a dry film thickness of 20 microns, conventional spraying will cover 6-8m² per litre.

Packaging : 1, 2.5, 5 & 20 litres

Colours : Red Oxide and Grey

EPOXY ZINC PHOSPHATE PRIMER

An epoxy resin based air dry primer. The product adheres well and provides hard wearing chemical resistant protection to correctly prepared steel surfaces [before over-coating takes place). It is designed to be very long lasting in adverse conditions. EPOXY ZINC PHOSPHATE is suitable for application by spray, brush or roller (depending upon area size) This is a hard-wearing primer which is economical as the paint is still useable once the pot has been opened. Most commonly used as an intermediate coat.

Coverage : On a dry film thickness of 45 microns, conventional spraying will cover 5-8m² per litre. 55 microns - 4.6m² per litre. Coverage will vary according to individual conditions.

Packaging : 1, 2.5 & 5 litres.

Colour : Grey

ETCH PRIMER - SINGLE PACK

Single Pack Etch Primer is an anti-corrosive, quick drying, metal etching primer offering excellent adhesion on both ferrous and non-ferrous metals. Whereas most non-ferrous metal primers are sprayed, Single Pack Etch Primer has the advantage of being suitable for either brush or spray application, they can be overcoated with most topcoats and intermediate priming systems. Product is ideal for dipping tanks when thinned by up to 30%.

Coverage : 8-9 m² per litre

Packaging : 1, 2.5 & 5 litre tins

Colours : Grey, Black & White

RED IRON OXIDE PRIMER

An alkyd resin based air dry primer - a very popular red iron oxide primer giving a high build, anti corrosion coating in one easy application. The product adheres well and provides protection to correctly prepared steel surfaces (before over-coating takes place). AP1 RED OXIDE is suitable for application by spray, brush or roller (depending upon area size). This is a hard wearing primer which is economical, as the paint is still useable once the pot has been opened.

On smooth surfaces of average porosity:

Coverage : On a dry film thickness of 50 microns, conventional spraying will cover 6-7m² per litre

Packaging : 1, 2.5, 5 & 20 Litres

POLYBOND GLOPANE UNIVERSAL

The most effective anti-corrosion protection for iron and steel is a metallic zinc coating. Glopane Universal is a single pack, general purpose primer for iron and steel that is air drying providing a method of applying a metallic zinc coating to substrates of any size and location. Moreover, any article that was originally hot dip galvanized can be repaired and given further protection. This product has a very high zinc content. It is now the most thoroughly proven zinc rich primer available. The chemical and weathering resistance of the resins in Glopane Universal is first class. The material, should of course, not be used in conditions in which there is likely to be undue attack of the zinc pigment itself. It can be used either as a primer or as a self finish on : Structural Steelwork, Metal Window Frames, Iron Gutters, Fire Escapes, Horticultural Frames, Farm Equipment, Water and Oil Tanks, Railings, Vehicle bodies, Boats etc. and on any ferrous metal surface subject to corrsion.

Coverage : 10m² per litre @ 50 microns applied to a smooth surface

Packaging : 1 & 2.5 litre tins

Colour : Grey only

HI-PRIME

The best paint finish will only be achieved from well prepared, stable substrates which are very smooth and clean. Normally, this means the application of a primer or sealer followed by several coats of undercoat with much sanding in between - this is a long and tedious process which is seldom done thoroughly. Hi-Prime, by providing a primer / sealer, filler / surfacer and undercoat in (usually) just one application, greatly reduces the time and effort required to achieve a fine finish. It is not even necessary to spray the finish coat for a superb effect - brushing is usually satisfactory. Hi-Prime can be overcoated with any paint - single or two pack, solvent or water based and may be stoved @ temperatures up to 130& deg;c.

Based on epoxy resins, Hi-Prime has superb adhesion to most surfaces, is tough, durable and resistant to sea water, oils and many chemicals. Its water based formulation makes it safe, environmentally friendly and easy and pleasant to use.

Coverage : Approx 7m² per litre

Packaging : 500ml, 1 & 2.5 litre tins

Colours : Pink & Mid Grey

MDF PRIMER

MDF Primer is ideal for use on structures manufactured from MDF composite board. It seals & adheres very effectively to the surface, producing a hard wearing, smooth surface ready for finishing. MDF primer eliminates the drying problems associated with normal primers, cutting the finishing time. It can be used not only on MDF but also on wood, chipboard and composite surfaces as a surface preparation primer prior to applying finishes.

Coverage : 5-8m² per litre @ 25 microns - spray. 4-6m² per litre @ 50 microns - brush

Packaging : 2.5 & 5 Litre tins

Colours : White, Black & Grey

POLYURETHANE UNDERCOAT

This is an polyurethane modified alkyd based undercoat which is easy to apply and has excellent opacity and flow. The product has very good filling properties, making it the ideal foundation for Polyurethane Finishes and enhancing the intensity of bright reds and yellows as well as some other lighter shades. The product contains no added lead.

Coverage : On a dry film thickness of 25 microns approx 10m²

Packaging : 1, 2.5, 5 & 25 Litre tins

Colours : All colours to BS or RAL range

HIGH BUILD SANDING SEALER

An excellent base prior to the application of clear cellulose or pre catalysed lacquers. The principal characteristics are quick drying and high build for fast and easy sanding on most substrates. Specially formulated to reduce the number of coats required. Both products can be easily tinted using our range of fully compatible woodstains. Uses - Basecoat for clear cellulose and pre catalysed lacquers. For use on fully veneered MDF or solid timbers, do not use on veneered MDF if routed edges of MDF are exposed.

Coverage : 4-6m² per litre

Packaging : 5 & 25 litre tins

Colour : Clear

SYNTHETIC UNDERCOAT

This is an alkyd based undercoat which is easy to apply and has excellent opacity and flow designed for brush applied renovation works or as intermediate coat for internal wood decoration. The product has very good filling properties, making it the ideal foundation for Synthetic Finishes and enhancing the intensity of bright reds and yellows as well as some other lighter shades. The product contains no added lead.

Coverage : On a dry film thickness of 25 microns - approx 10m²

Packaging : 1, 2.5, 5 & 25 litre tins

Colours : All colours to BS or RAL range

ZINC RICH PRIMER

This primer is formulated to produce a dry film containing a high zinc content, thus providing cathodic protection against corrosion on iron and steel. It is designed for application to shot-blasted steel and normally allows subsequent welding of thin coats up to 25 microns dry film thickness.

Coverage : On a dry film thickness of 35 microns, conventional spraying will cover 5-8m² per litre, 50 microns will cover 4-6m² per litre. Coverage will vary according to individual conditions

Packaging : 1, 2.5, 5 & 25 litre tins

Colour : Grey

TWO PACK ETCH PRIMER

A vinyl based etch primer giving excellent adhesion to a variety of substrates, particularly those regarded as 'difficult' i.e. aluminium, while improving corrosion resistance when used in conjunction with appropriate finishes i.e. stoving enamels, it is very commonly used before powder coating to give additional adhesion. The benefits of TWO PACK ETCH PRIMER include very fast drying & can be overcoated with a variety of primers & finishes.
TWO PACK ETCH is used widely on difficult substrates to gain ultimate keying and adhesion.

Coverage : A dry film thickness of 5-10 microns will give coverage of 6 - 7 square metres per mixed litre, but figures may vary

Packaging : 10L 2 part pack. 5L Activator & 5L Base. 50:50 mix

RUST CONVERSION PRIMER

IDEAL FOR USE IN INDUSTRY, GARAGES, FARMS, AROUND THE HOME, ON CARS, CARAVANS & BOATS ETC.

Polybond Rust Converter is a reactive polymer which can be applied to all types of rusted steel which has been cleaned. The product reacts quickly with rust, transforming iron oxide into a stable insoluble blue / black metallo-organic material, ready for painting. The tough acrylic film provides added protection prior to overcoating.

RUST CONVERTER SAVES TIME AND MONEY - Using our product cuts down on preparation costs, makes light of an otherwise difficult, dirty and lengthy job. Penetrates directly in to residual rust, Reacts quickly with rust - average time 2 hours, Forms a water insoluble film on to which paint systems can be applied, Unlike other chemical treatments, it is not necessary to wash treated surfaces with water prior to application of paint system, Prevents and stops the formation of rust.
Without this treatment, rust will remain active beneath paintwork

Coverage : Approx 10-12m² per litre

Packaging : 500ml, 2.5 & 5 litre tins

Colour : Milky when liquid / turns rust black

HIGH BUILD CELLULOSE PRIMER FILLER

A fast drying, high build cellulose primer designed to fill surface scratched or similarly defective metal, stone chip damage, polyester body filler, glass fibre mouldings and most factory or refinish paint systems except air dried synthetics. It is supplied ready for use. Will flat easily to a feathered finish and can be used as a primer under cellulose, 2pk acrylic and synthetic top coats.

Build & Pressure : One even coat will give a build of approx 20-40 microns

Colours : Grey & White

ACRACLAD

A heavy duty acrylic exterior paint formulated for application to plastisol and polyester surfaces. Acraclad is supplied as a single pack with a semi-gloss / satin finish. It combines chemical and light fast pigments to give high resistance to ultra violet light.
Easily applied by spray, brush or roller.

Coverage : On a dry film thickness of 40 microns, coverage will equal 9m² per litre

Packaging : 2.5, 5 & 20 litres

Colours : All RAL and BS Standards - made to order

ACRAPOXY - 2PK EPOXY

A general purpose high performance, high build 2 pack epoxy paint system. It gives excellent mechanical properties such as hardness, toughness & chemical resistance combined with good resistance to a wide range of chemicals, including dilute acids/alcohol's and mild solvents. It is used for general finishing for interior work on ferrous and non-ferrous metals, wood, concrete, fibreglass, asbestos and various plastics. Clear is used extensively as a high performance clear coat for contract furniture and flooring applications. Combines a good wet edge time with rapid thorough drying and consistency, curing is good, even at very low ambient temperatures.

Compared with Q19 2 pack epoxy finishes, this coating possesses superior gloss retention and weather resistance and would be preferred for applications in which outdoor durability is more important than chemical resistance. Also is faster curing due to being solvent based. Where it is essential to have the maximum durability and gloss retention possible, combined with chemical resistance and anti-yellowing properties.

Coverage : Approximately 5 m² per litre at 50 microns

Packaging : Available in component form 3 and 6 litre packs

ACRYLIC ENAMEL - SINGLE PACK

A tough and durable fleet enamel for commercial vehicles and high quality industrial finishing of all types. It combines a long wet edge time with quick through drying allowing the largest of vehicles to be sprayed without dusty overspray problems, but at the same time, yielding rapid taping and processing times for realistic second colour and sign writing applications. It is based on a unique specially formulated blend of acrylic and chain stopped alkyd resins - leading to excellent gloss retention, abrasion resistance, adhesion, toughness, durability and chemical resistance. A particular feature is its good resistance to "yellowing" in white and pastel shades combined with excellent light fastness and hiding power making it very economical in general usage. This product finds its uses in the decorative field including interior and exterior wood finishing and also in other applications where its great abrasion resistance, toughness and gloss retention making it a popular choice for heavy duty flooring applications.

Coverage : Approx 9-10m² pr ltr @ 35 microns DFT

Packaging : 1, 2..5, 5 & 20 litres

Colours : All RAL & BS Standards

ACRYLIC ENAMEL - 2PK

This high quality TWO PACK ACRYLIC ENAMEL avoids the use of isocyanates but still affords many of the important properties or urethane systems. The finish may be used on metal and glass reinforced (GR) Phenolic board and the cured film has good resistance to many chemicals and to mechanical damage. Its durability and excellent colour retention make this product ideal for exterior as well as interior use.

Coverage : Calculated on a dry film thickness of 25 microns. Conventional Spray - 9-10 sq. mtrs per ltr of mixed material (90-100 sq. ft per ltr of mixed material). This will vary with the type of spraying equipment used. The coverage figures shown are approximate and will vary with the type of equipment being used..

Packaging : 3 & 6 Litre twin packs

Colours : All RAL & BS Standards

ACRYLIC STOVING ENAMEL

Acrylic Stoving Enamel is a high performance, rapid pouring, high build, general purpose amino stoving enamel. It combines excellent colour and gloss retention together with good physical properties. Acrylic Stoving Enamel is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties. Acrylic Stoving Enamel is formulated for use with all types of spray equipment including hot spray, airless, electrostic and spinning bell dip is also possible.

Coverage : Approx 15m² per litre @ 25 microns DFT

Packaging : 1, 2..5, 5 & 20 litres

Colours : All RAL & BS Standards

ANTI-GRAFFITTI COATING

A two pack high gloss finish that when cured is totally impervious. This allows easy removal of graffiti with any conventional graffiti remover or stain removing detergent.

Coverage : 8M² per litre

Packaging : 2.5 & 5 litre tins

Colours : Clear or a range of BS / RAL colours

ANTI-VANDAL - NON CLIMB COATING

A single pack, high build, non drying solvent based coating. This product stays tacky for as long as twelve months. If touched gives a wet paint feel.

Coverage : 8m² per litre

Packaging : 2.5 & 5 litre tins

Colours : Clear or a range of BS / RAL colours

CHASSIS ENAMEL

CHASSIS ENAMEL is a high quality 2 hour alkyd synthetic enamel. Coatings offer fast surface drying even in thick films, minimum yellowing & outstanding film hardness and toughness. CHASSIS ENAMEL can be used for heavy duty vehicle finishing as well as for vehicle repair work and due to its good resistance to oils, fats and cutting oils etc, makes this an ideal choice for machinery enamel. It is flexible and gives good performance over both interior and exterior wood.

Coverage : At a DFT of 45 microns you should achieve 10m² per litre

Packaging : 2.5, 5 and 25 litres

Colours : All RAL & BS Standards

CHLORINATED RUBBER

A durable, heavy duty protective coating which is resistant to a wide range of chemicals, acids, alkalis, mineral oils and greases, sea water and is extremely UV Stable. CHLORINATED RUBBER PAINT will protect metals, concrete, wood, brickwork, asbestos-cement, corrugated iron and most other building surfaces. It is suitable for interior and exterior use on both new and existing work and produce tough, flexible coatings. CHLORINATED RUBBER PAINT is easy to apply and fast drying.
Their chemical resistance makes them ideal maintenance coatings for :

• Process plants, bridges and steel fabrications
• Silage pits, sewage farms and water works
• Hospitals, farm buildings, swimming pools and breweries
• Factories, power stations, gas holders and tanks
• Water immersed structures, boats and marine establishments

Coverage : On Approx 8-10m² per litre per coat

Packaging : 2.5, 5 and 25 litres

Colours : All RAL & BS Standards

EPIGLO

Epiglo Clear is designed for heavy duty work where protection is required against highly corrosive elements. It is air drying and has excellent chemical resistance, remarkable adhesion to almost any surface showing exceptional hardness with a degree of flexibility and good heat resistance.

Epiglo Clear is a tough, clear epoxy resin solution that can be applied to a wide range of substrates ie metals, concrete, masonry, GRP, wood and some composite materials. The product can be applied to any suitably prepared surface by brush, roller or spray and when cured provides a clear, inert barrier with exceptional adhesion. Epiglo Clear dries to a high gloss finish providing a protective barrier coat to both metal and concrete structures. It also acts as a stabilizer and sealer for concrete and GRP.

Coverage : On smooth surfaces of average porosity : 6-9m² On non porous surfaces : 9-11m²

Packaging : 2.5 & 5 litre tins

Colours : Clear only

EPOXY COAL TAR

EPOXY COAL TAR is a major development in protective coatings, designed to resist chemical attack and rigorous weather conditions by combining the outstanding properties of epoxy with those of coal tar. Thick coatings can be built up with minimum labour costs, each coat being 5-10 times as thick as normal paint coatings. In addition, it may be applied in almost any conditions under which is reasonable for men to work and attains its superior properties even when immersed in water or sea-water soon after its application. In practice EPOXY COAL TAR is designed as a heavy duty anti-corrsive and protective coating for iron and steel, non-ferrous metals and for other types of constructional materials such as concrete, bricks, timber etc. The material is black in colour and gives a coating of approx 125 microns (0.005") in a single application. It is designed as a brushing material, but may be sprayed with airless equipment. EPOXY COAL TAR is easy to use, contains little solvent, dries quickly and cures under water.

Coverage : 5-6 sq. mtrs per litre @ 125 microns dry film. The estimated coverage rate is based on application on smooth, non-porous surfaces. On rough or porous surfaces, coverage will be less

Packaging : 2.5 & 5 litre twin packs

Colours : Black only

HAMMER FINISHES

Hammer Finishes are used to produce an attractive and durable special effect finish which will hide imperfections on marked, pitted or uneven surfaces of all types. This popular general purpose Hammer Finish is suitable for application to a wide variety of substrates and offers excellent drying, gloss, adhesion and weathering properties. Fast air drying, it produces a good hammer pattern whether sprayed or brushed.

Coverage : 5-8m² per litre @ 25 microns - spray. 4-6m² per litre @ 50 microns - brush

Packaging : 1, 2.5 .5 & 25 Litre tins

Colours : All BS or RAL Standards

HD ACRYLIC

FOR EXTERNAL USE AS A WALL PAINT ON HOUSES, FACTORIES, SHOPS ETC.

HD Acrylic can be used to protect a wide range of building surfaces including brick, masonry, stucco, render, plaster and fibre board etc. HD Acrylic can be painted over most existing masonry paints and emulsions. It can also be applied as an obliteration coat on glass. HD Acrylic must be applied to surfaces that are dry, clean, sound and free from any oil or grease. Unsound previous coatings or loose material should be removed before application and all bare areas patch primed. Existing mould growth can rapidly be eliminated by using Polybond Fungicidal Wash. HD Acrylic can then be directly applied to the surface.

The product is supplied ready for use by brush or roller. On some previously painted surfaces a one coat application is all that is required. On surfaces of average porosity however, two coats will be overcoated after 4 - 6 hours depending on weather conditions. Wash hands and equipment out in water immediately after use.

Coverage : 9m² per litre, less on porous substrates

Packaging : 2.5 litre, 5 litre and 25 litre drums

Colours : White, Black, Tile Red, Dark Green, Grey, Sandstone, Magnolia and Cream. Also a Clear Sealer.

HIGH TEMPERATURE RESISTANT PAINT

HIGH TEMPERATURE RESISTANT PAINT is an air drying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures of up to 760°c. A particular feature of the high temperature range of products is their excellent resistance to 'thermal shock' combined with excellent petrol/oil resistance. At temperatures of up to 300²c, there is virtually no decomposition of the silicone binder. Above 300²c, the silicone is gradually driven off without charring or flaking of the paint. From 300-760²c, the finish is still efficient because the pigment film sinters on to the surface.

Coverage : 9 - 10 m² per litre

Packaging : 1, 5 & 25 Litre tins

Colours : Black & Aluminium

HYPALON

A protective coating that is resistant to most industrial chemicals and ozone proof. Non combustible coating that retards the spread of flame to a combustible substrate. Exterior reflective coating for protection against sunlight that will not fade or discolour. Flexible coating for non-rigid substrates where a conventional coating would be too brittle. The product is ideal for rubber and PVC coating.

Coverage : 2-3 litres per 10m² per coat. Two coats are recommended

Packaging : 5 & 25 litre tins

Colours : Black. White. Yellow. Other colours available MTO

POLYURETHANE ENAMEL

A tough and durable fleet enamel for commercial vehicles and high quality industrial finishing of all types. It combines a long wet edge time with quick through drying allowing the largest of vehicles to be sprayed without dusty overspray problems, but at the same time, yielding rapid taping and processing times for realistic second colour and sign writing applications. It is based on a unique specially formulated blend of polyurethane and chain stopped aliphatic resins - leading to excellent gloss retention, abrasion resistance, adhesion, toughness, durability and chemical resistance. A particular feature of the product is its good resistance to "yellowing" in white and pastel shades combined with excellent light fastness and hiding power making it very economical in general usage. This product finds its uses in the decorative field including interior and exterior wood finishing and also in other applications where its great abrasion resistance, toughness and gloss retention makes it a popular choice for all applications.

Coverage : Approximately 9-10 square metres per litre at 35 microns DFT

Packaging : 1, 2.5, 5 & 25 litre tins

Colour : All BS & RAL Standards

Q19 - 2PK EPOXY - WATERBASED

New Q19 is a two pack epoxy resin paint which has been dispersed in water. The 'new' formulation is even easier and more economic to use. When fully cured, it provides a tough, colourful, tile like and impervious eggshell finish.

Remember - Q19 Clear penetrates so well that when cured, it becomes an integral part of the structure. Main uses include : As a decorative waterproofer on damp surfaces, inside and out. As an easy-to-clean anti graffiti finish. As a 'Tanking' paint in basements and cellars. Waterproofs any porous substrate including concrete, brick, blocks, stone, plaster, hardboard, MDF, chipboard, cardboard etc. As a tough, mould resistant, hygienic wall finish for factories, farms, breweries, canteens, swimming pools etc. Easy to steam clean or pressure hose. As an integral waterproofing membrane under renovating cementitious plaster systems such as Tilcon Limelite. As an alkali resisting primer and damp-proofer beneath masonry paints etc. As a tough, hygienic, colourful finish in wet areas, changing rooms etc. For priming and sealing solvent sensitive surfaces, i.e. asphalt, polystyrene, bitumen etc. To protect and re-decorate walls and cellars after flooding. It speeds up renovation work helping to prevent further ingress of moisture.

Coverage : See full technical data

Packaging : 1, 2.5 & 5 Litre 2pk tubs

Colours : Magnolia, Cream, Grey, Light Blue, White and Black. Other colours sometimes available, please enquire

QUICK AIR DRYING

QAD Enamel is a high quality 1 hour alkyd synthetic enamel. Coatings offer fast surface drying even in thick films, minimum yellowing & outstanding film hardness & toughness. QAD Enamel can be used for heavy duty vehicle finishing as well as for vehicle repair work and due to its good resistance to oils, fats and cutting oils etc makes this an ideal choice for machinery enamel. It is flexible and gives good performance over both interior & exterior wood and metal surfaces. Excellent results are achieved when applied to MDF. QAD Enamel can be applied direct on to unprimed surfaces in a single or two coat application.

Coverage : Brush : 7-8m² per litre Spray : 8-9m² per litre

Packaging : 1, 2.5, 5 & 25 litre tins

Colour : All BS & RAL Standards

STANDARD STOVING ENAMEL

Standard Stoving Enamel is a high performance, rapid pouring, high build, general purpose amino stoving enamel. It combines excellent colour and gloss retention together with good physical properties. Standard Stoving Enamel is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties. Standard Stoving Enamel is formulated for use with all types of spray equipment including hot spray, airless, electrostic and spinning bell dip is also possible.

Coverage : Approx 20m² per litre @ 25 microns DFT

Packaging : 1, 2.5, 5 & 25 litre tins

Colour : All BS & RAL Standards

SYNTHETIC ENAMEL

A durable, premium quality, alkyd based decorative coating for interior and exterior use on wood, metal, plaster and other surfaces which have been prepared and primed. The use of high grade pigments ensures optimum opacity and weathering characteristics with a long exterior life when used correctly. The product contains no added lead.

Coverage : On a dry film thickness of 30 microns approx 10m²

Packaging : 1, 2.5, 5 & 25 litre tins

Colour : All BS & RAL Standards

TENNIS COURT PAINT

Polybond Tennis Court Paint will provide a very durable, decorative coating to concrete, weathered asphalt & tarmac and composite playing surfaces. It is quick and easy to apply and once dry, its hard wearing, flexible surface will protect the underlying substrate and provide a non reflective, low sheen finish ideal for play surface use. The product can be easily transformed into a higher grip finish by adding a special aggregate in between the two coat system. However, for most applications, this should not be necessary. Hard Tennis Paint is a single pack, low solvented paint which is easily applied by soft broom, brush, roller or conventional & airless spray systems. Hard Tennis Paint is ideally suited for application to internal & external tennis courts and play surfaces. It will tolerate domestic abrasion and resist the marking of rubber soled sports shoes, balls etc. The coating can be scrubbed clean & scuff marks removed without damaging the system. The paint resists common chemicals, oils and the weater. It is resistant to rain water although it is advisable to remove excessive surface water to prevent puddling. Areas of hard wear can be patch primed at any time. Touch up kits of the same batch should be left with the customer at the time of application. The paint can also be applied as a general decorative finish to a wide variety of surfaces such as brick, masonry, stone & metalwork.

Coverage : 6-9m²/ltr depending on substrate. 4-6m²/ltr when used over a non-slip surface. 9-12m²/ltr when spraying second coats

Packaging : 5 & 25 litre tins

Colour : Tile Red, Dark Green, Mid Green, Black, White & Clear

SWIMMING POOL PAINT

Outstanding resistance to Water, Chlorine, Sodium Hypochlorite, Mould, Algae and Pool Chemicals (in dilution). Unaffected by Sunlight. Provides a long lasting, tough finish which is easy to re-coat.

May also be used on render, brickwork, wood and metal surfaces around the pool.
On smooth surfaces of average porosity:

• Primer Coats 7m² per litre
• Finishing Coats 7m² per litre

Packaging : 2.5 & 5 Litres. 25Litres available in volume only

Colours : White. Lagoon Blue (approx 18-E-50). Lido Blue (approx 18-E-51). Black. Other BS colours available in large quantities

HD ACRYLIC - SINGLE PACK ACRYLIC BASED FLOOR COATING

FOR :- Protecting and Decorating Walls, Floors, Paths & Driveways in Domestic and Industrial Environments.

HD Acrylic is a new, smooth, tough, quick dry coating which is versatile enough for multi use on a whole range of surfaces. It is resistant to the weather and provides an excellent finish for concrete floors in domestic and light industrial areas, tennis courts, paths, car parks etc. Water based HD Acrylic dries quickly to a silk sheen finish producing a surface which is hygienic and easily kept clean and is therefore safe and convenient to use with little or no smell.

Coverage : 9m² per litre. (Less on porous substrates)

Packaging : 2.5, 5 and 25 litre tins

Colours : White, Black, Tile Red, Dark Green, Grey, Sandstone, Magnolia and Cream. Also a Clear Sealer

EPISOL - SOLVENT FREE EPOXY FLOOR COATING

A 2pk, solvent free epoxy coating specially formulated for use on all types of floors where a high level of protection is required against physical wear, spillage and soiling. It provides a high build, glossy coating which is non-tainting during application. Once cured, the Episol film is inert and will withstand heavy traffic. It is easily cleaned and the shine can be maintained by regular polishing. Suitable for use in Factories, Hospitals, Warehouses, Showrooms and Workshops.

Coverage : At 300 microns approx 4m² per litre per coat depending on surface profile

Packaging : Clear 2.5 & 5kg. Colour 5Kg only

Colours : Grey (18-B-21), Dark Green (14-C-39), Dark Grey (18-B-25), Tile Red and Clear

POLYFLOOR - POLYURETHANE SINGLE PACK FLOORPAINT

This type of floor paint is ideal for wooden and concrete floors both internally and externally. It is based on modified polyurethane resins which are tough and flexible. Thus it provides a hard wearing surface which is resistant to chemicals and oils and yet smooth enough to be hygienic and easy to clean, preventing problems of dusting and staining. The product is quick drying and therefore recommended as a protective coating to garage and factory floors where minimum time is available for shutdown. The product can be applied quickly and easily over a weekend by unskilled labour, ready for use on Monday morning.

Coverage : Colour : 7-8m² per lite. Clear : 8.5m² per litre

Packaging : 2.5, 5 & 25 Litre tins

Colours : The product is available in a wide range of colours that dry to a mid gloss finish. For extra shine, a clear surface glaze is also available

2PK POLYFLOOR - 2PK POLYURETHANE BASED COATING

Polyurethane coatings provide protection to many types of surfaces in a wide range of industrial and commercial areas where a glazed finish is required. This product may be applied by brush, roller or spray. The continuous surface prevents penetration of moisture or dirt. The product can be used on walls, ceilings, woodwork and metals which are ferrous or non ferrous and thus has many uses throughout numerous industries. It has excellent release and abrasion resistance properties making it deal for the inside coating of storage bins containing fine powders and as a release agent for concrete shuttering made of both wood and metal.

Coverage : Undercoat : 9m² pr ltr @ 50 microns. Topcoat : 10mm² per litre @ 40 microns. These figures are based on application to smooth & non-porous surfaces.

Packaging : 3 & 6 litre twin packs

Colour : All RAL and BS colours available

QUICKFLOOR - WATER BASED 2PK FLOOR COATING

A full-bodied epoxy paint for a tough, attractive and long lasting finish to most floor surfaces. Polybond Quickfloor will withstand arduous industrial / commercial pedestrian and vehicular traffic. It is easy to keep clean, resists scuffing and marking keeping a good decorative finish for many years. Water-based, non flammable and non-hazardous. Use on concrete, masonry, asphalt and wood. Can be applied to damp surfaces. Easy to apply by roller or brush. Little smell and ideal for use in factories... no need for shut down.

Ideal for workshops, factories, warehouse, garages, showrooms, farm buildings, conservatories, changing rooms, toilets, pool surrounds, cellars, shops and food premises etc.

Coverage : On smooth surfaces of average porosity approximately 10m² per litre of Clear and 8m² per litre for the finish. When coating over grit allow around 5m² per litre

Packaging : 2.5 litre tubs

Colours : Clear, Grey (18-B-21), Dark Grey (18-B-25), Dark Green (14-C-39) and Tile Red

SLP - SPORTS LINE PAINT

SLP is a new hi-tech, very tough, single pack, solvent based product which can be applied by brush or spray to a range of synthetic and composite sports surfaces these include : Running Tracks, Football Pitches, Play Areas, Tennis Courts and Artificial Turf etc. It is extremely durable and will perform over many seasons making it an ideal and economic lining paint. The coating remains flexible yet adheres well to most types of track. SLP dries within a few hours enabling surfaces to be put back in to use the next day.

Coverage : approx 9m² per litre on smooth surfaces (See full technical data)

Packaging : 1, 2.5 & 5 litre packs

Colours : White, Yellow, Black. Blue and Red

SR FLOORPAINT

FOR :- Concrete and Wooden Floors. It gives outstanding performance as a protective coating on most types of floor, both internally and externally. It is quick, easy and inexpensive to apply. The modified synthetic rubber resins on which it is based are tough yet flexible and provide a hard wearing surface, resistant to common chemicals and oils. The smooth surface of S R Floorpaint is hygienic and easy to clean and will prevent problems of dusting and staining.

Coverage : Pigmented : 7m² / litre. Clear Glaze : 8.5m² / litre

Packaging : 2.5, 5 & 25 litre tins

Colours : Tile Red, Sandstone, Dark Green, Grey & Clear

VARNISHES

Acron Varnishes with their rapid dry and health/safety properties are rapidly finding uses in the DIY Marketplace.

Available in gloss, silk (satin) and matt finishes they have several advantages over traditional oil based and polyurethane based varnishes. In particular, the silk or satin varnish is now being used extensively for cork floor and decorative cork wall tiles. Its hard wearing properties combined with retention of flexibility have made it a winner in this field. It is possible to coat a cork floor with three coats of Acron satin varnish and walk on the area in one day. Substantial savings can be made on the cost of pre-coated tiles with the added advantage that the seams are also coated. Quick to apply by spray, roller, brush or pad. Three coats can be applied to a floor and walked on within half a day.

Coverage : 12-16m² per litre, per coat

Packaging : 1, 5 & 20 litre tins

Finish : Available in gloss, silk (satin) or matt. The popular silk finish has slightly better wearing properties and is easy to product a matt effect by rubbing with fine steel wool.

CONCRETE CLEANER - PRE-TREATMENT FOR CONCRETE FLOORS

Concrete Cleaner is a material scientifically designed to remove contamination from concrete and all types of building surface. Diluted, it is an excellent cleaner for paintwork and metal work such as copper and brass. It CLEANS : Concrete, Stone, Brickwork, Render, Plaster, Granolithic, Terrazzo, Ceramic Tiles, Vinyl Tiles, Lino, Rubber, Wood and Concrete Shuttering etc. It REMOVES : Oils, Greases, Fats, Efflorescence, Rust, Lime, Blood, Soot and Seaweed etc.

Concrete Cleaner is the ideal pre-treatment for concrete prior to the application of Quick Floor Epoxy Paints, PVA, Screeds, Floor Paints, Line Paint, Tiles and Sealers etc.

Typical environments in which Concrete Cleaner has been used are Garages, Car Parks, Transport Depots, Airports, Dock Installations, Factories, Dairies, Abattoirs, Farms, Motorway Bridges, Refineries, Power Stations, Breweries, Printing Works and Yacht Clubs etc.

Coverage : This depends on the porosity and degree of contamination, however as a guide, it will clean approximately 30m² per 5 litres

Packaging : 2.5, 5 & 25 litre containers

EPOXY FLOOR REPAIR KIT

Episol Epoxy Floor material has been designed to enable contractors and owners of floors to quickly repair holes, indentations and unevenness in surfaces prior to applying floor paints such as Episol Solvent free Epoxy, Quickfloor etc. The product is solvent free almost odourless and quickly chemically cures to a hard dense surface capable of taking traffic and resisting a wide range of chemicals. Repairs will not shrink and it will bond to most floor surfaces. Used in a liquid form the filler will penetrate deep down into cracks forming a permanent bond.

Episol Epoxy Repair Kit can be used on concrete, composite floors, concrete aprons, damaged screeds etc. in fact on any type of horizontal surface in need of repair.

Coverage : approx 2 kg covers 0.25 m² @ 6mm deep

Packaging : 2kg

NON SLIP AGGREGATES - FLOOR COATING ADDITIVE

Polybond supply a range of special aggregates to use with their coating systems graded as follows :

GRADE NO. 4 - This is the most coarse grade available and can only be used with the heavier paint systems ie. Episol solvent free floor paint. The main area of use would be on vehicle ramps to car ferries, ships decks etc. where you would require exceptional grip. These areas are normally subject to very hard wear in extreme weather conditions. The grit provides a rugged profile and should be cast in to the tacky surface of the Episol and allowed to dry then encapsulated when dry. Can also be used with Coal Tar Epoxy Coating in marine environments on to steelwork and decking where positive grip and chemical resistance is required i.e. in oil refineries and drilling platforms etc.

GRADE NO. 5 - A medium coarse grade which has a wide application. It can be used with all our Epoxy floor finishes including Episol and Quickfloor. It is ideal for steps, ramps, steel walkways and simulated climbing structures in sports halls etc. Both application methods can be used. Care should be taken when using both grade 4 and 5 to avoid areas where children are likely to play as falling on to the resultant profile could cause severe abrasion and laceration to the skin.

GRADE NO. 6 - This is the most popular grade used with all our floorpaint systems. Obvious applications would be on floors which are constantly slippery i.e. spillage of water, oils etc. Garages, hospitals, warehouses and around the home. The grade is easily encapsulated within the paint to give long term protection and unlike the coarser grades provides a surface which is easier to keep clean.

GRADE NO. 7 - The finest of all the grades available, this is ideal for use where a background grip is required without the surface feeling too rough. It is ideal where floors have to be kept clean yet need to have a degree of grip i.e. play and sports surfaces, factory isles, animal pens, boat decks etc. The advantage with the fine grade is that it is easy to add to the paint putting in as much or as little as is required, it can also be encapsulated if need be.

MDF PRIMER

MDF Primer is ideal for use on structures manufactured from MDF composite board. It seals & adheres very effectively to the surface, producing a hard wearing, smooth surface ready for finishing. MDF primer eliminates the drying problems associated with normal primers, cutting the finishing time. Can be used not only on MDF but also on wood, chipboard and composite surfaces as a surface preparation primer prior to applying finishes.

Coverage : 5-8m² per litre - spray. 4-6m² per litre - brush

Packaging : 2.5 & 5 Litre tins

Colours : Black/White/Grey

HIGH BUILD MDF SEALER

A high build, fast and easy sanding basecoat. Specifically manufactured for use on MDF. This is a hydrocarbon free sealer which is specially formulated to eliminate drying problems which can occur with normal basecoats on MDF substrates. Uses : Sanding basecoats for clear cellulose and precatalysed lacquers. For use on unveneered MDF, or veneered MDF where routed profile edges of MDF are exposed.

Coverage : 4-6sq m² per litre depending upon drying conditions and film thickness

Packaging : 5 & 25 Litre tins

STOCK SANDING SEALER

An excellent base prior to the application of clear cellulose or pre catalysed lacquers. The principal characteristics are quick drying and high build for fast and easy sanding on most substrates. Specially formulated to reduce the number of coats required. Both products can be easily tinted using our range of fully compatible woodstains. Uses : Basecoat for clear cellulose and pre catalysed lacquers. For use on fully veneered MDF or solid timbers, do not use on veneered MDF if routed edges of MDF are exposed.

Coverage : 4-6m² per litre

Packaging : 5 & 25 Litre tins

ACID CAT LACQUER

A 2 pack formulation used to give a very high build, tough, resilient film for applications where durability and quality of finish are paramount. The exceptional flow properties combined with excellent heat and chemical resistance make it suitable for most types of furniture and interior joinery including table tops. Uses : for use on domestic, reproduction, contract and office furniture. Will comply with BS 6250 (severe use) when applied coat on coat.

Coverage : 4-6m² per litre depending upon film thickness applied

Packaging : 5 & 25 Litre tins

Colours : Any gloss level from 10% to full gloss. Colours can be matched to most recognized colour standards or to customers own pattern.

PRE CAT LACQUER

A Specially formulated high build, single pack lacquer with excellent flow and fast drying properties. It is suitable for most types of furniture and interior joinery where a hard, durable, quality finish is required with good resistance to both heat and chemical attack. Uses : for use on domestic, reproduction furniture and interior joinery. Will comply with BS 6250 general use, when applied over suitable basecoat or coat on coat.

Coverage : 4-6m² per litre depending upon film thickness applied

Packaging : 5 & 25 Litre tins

Colours : Any gloss level from 10% to full gloss. Colours can be matched to most recognized colour standards or to customers own pattern.

VARNISHES

Acron Varnishes with their rapid dry and health/safety properties are rapidly finding uses in the DIY Marketplace. They have several advantages over traditional oil based and polyurethane based varnishes. In particular, the silk or satin varnish is now being used extensively for cork floor and decorative cork wall tiles. Its hard wearing properties combined with retention of flexibility have made it a winner in this field. It is possible to coat a cork floor with three coats of Acron satin varnish and walk on the area in one day. Substantial savings can be made on the cost of pre-coated tiles with the added advantage that the seams are also coated.

Coverage : 12-16m² per litre, per coat

Packaging : 1, 5 & 20 Litre tins

Finish : Available in gloss, silk (satin) or matt. The popular silk finish has slightly better wearing properties and is easy to product a matt effect by rubbing with fine steel wool.

POLYBOND UNIVERSAL - PVA

Polybond Universal is a medium viscosity homopolymer emulsion of Vinyl Acetate. The emulsion is stabilised with polyvinyl alcohol and is plasticised with 10% (on polymer solids), of a dibenzoate blend.

It has good adhesive properties to a wide range of substrates, such as wood, concrete, paper etc. It has pseudoplastic flow characteristics and good storage stability. Undiluted, it passes the requirements of the bond strength test contained in British Standard 5270:Part 1:1989.

Suitable application areas include :

• Universal Bonding Agent
• Concrete Additive
• Sealer
• Plaster Additive
• Rendering & Screeding
• General Woodwork Adhesive
• Class B Tile Adhesives

Coverage : See full technical Data

Packaging : 250/500ml, 1, 2.5, 5 & 25 Litre tubs

GUNWASH

Gun & equipment cleaner. Not recommended for mixing with any paint related material.

Packaging : 5 & 25 Litre tins

ANTI-BLOOM THINNERS

For use with high gloss automotive finishing products when possible subjection to cold and damp conditions.

Mixing Ratio : 10% approx

Packaging : 5 Litre tins

HIGH GLOSS QUALITY THINNERS

For use with 2pk automotive topcoats and primers.

Mixing Ratio : 10% approx

Packaging : 5 Litre tins

INDUSTRIAL METHYLATED SPIRIT

Used for cleaning powder coating equipment. Will dissolve uncured powder paint.

Packaging : 5 Litre tins

MDF THINNERS

For use with MDF primer & high build MDF primer.

Packaging : 5 Litre tins

M E K - (METHYL ETHYL KETOXIME)

Used as a very strong cleaner. Also good for thinning and extending working time for 2pk chromate etch primers.

Packaging : 5 Litre tins

MORDANT T WASH

Pre-treatment for galvanised steel. Neutralises galvanised in preparation for painting.

Coverage : 10m² per litre

Packaging : 5, 25 & 205 Litre tins

PANEL WIPE

For degreasing and cleaning ferrous and non ferrous substrates prior to priming or powder coating.

Coverage : approx 100m² per 5litre

Packaging : 5 & 25 litre tins

POLYBOND THINNERS

For use with most Polybond Solvent based products. Mostly sold with swimming pool paints.

Mixing Ratio : See technical data of each product

Packaging : 1, 2.5, & 5 Litre tins

SPEED THINNERS

For use with polyurethane and alkyd products when high gloss must be maintained.

Mixing Ratio : 10% approx

Packaging : 1, 2.5, 5 & 25 Litre tins

SPRAY 75 THINNERS

For use with polyurethane and alkyd products when high gloss must be maintained. For use with C71 and FS32 Resins.

Mixing Ratio : 10% approx

Packaging : 1, 2.5, 5 & 25 Litre tins

UNIVERSAL THINNERS

For use with high build primers and etch primers, will thin most paints. NOT for use with cellulose.

For use with polyurethane and alkyd products when high gloss must be maintained.

Mixing Ratio : 10-15% approx

Packaging : 1, 2.5, 5, 25 & 205 Litre drums

WHITE SPIRIT

For domestic household oil based paints. Usually used for cleaning brushes.

Packaging : 5 & 25 Litre tins

STANDARD (CELLULOSE) THINNERS

Reclaimed multi-purpose economical thinner which will thin most products but affect/reduce gloss level depending upon product.

Mixing Ratio : 10-15% approx

Packaging : 5 & 25 Litre drums

---

back